Crosshair v updating bios the tao of dating
The power phase control for the CPU can be user configured with the CPU PWM Phase Control option set to Manual Adjustment.Configuring this option for the Ultra Fast value enables the most aggressive response time settings.
Similarly, the CPU/NB Load Line Calibration option configures the oversight for the memory controller v Droop voltage, with Extreme allowing for the tightest control.
The VDDR option configures the memory controller power regulation circuitry voltage, with a 1.802V maximum settable.
Accessed via the DRAM Timing Control link from with the top level Extreme Tweaker menu, the DRAM Timing Control submenu houses the user configurable memory timing settings as follows: CAS latency; RAS to CAS delay; RAS precharge delay; active to precharge delay (DRAM RAS# ACT Time); read to precharge delay; RAS to RAS delay; write to read delay; CAS write latency; write recovery delay; row refresh cycle delay; row cycle time; read to write delay; write to read delay across DIMMs (DRAM WRITE To READ Delay(DD)); write to write delay; read to read delay; refresh rate; and command rate The DRAM Driving Control sub-menu is accessed through the DRAM Driving Control link on the top level menu. DIMM Post link from the top level menu, displays information concerning the video cards and memory plugged in to the system slots.
The SB Voltage configures the voltage supplied to the Southbridge chipset, with a maximum of 1.802V.
The switching frequency for the Northbridge component related power regulation circuitry can be configured for operation at 2x maximum through the NB Voltage, NB 1.8V, and VDD PCIE Switching Frequency settings.
Search for crosshair v updating bios:
The VRM Fixed Frequency Mode setting allows for a switch frequency to be set up to 550.